|
Post by Harris on Apr 26, 2016 23:00:52 GMT
Hello, Have opted to convert the points and condenser to an AccuSpark electronic ignition. Anyone had experience of these? Out Kestrel is Positive earth which makes the wiring more complicated. Installed it at the weekend and got no spark. Any pointers?
|
|
|
Post by 2robert4 on Apr 27, 2016 7:38:45 GMT
I fitted one of these units to my one point five about two years ago and touch wood it has been fine although I did have to alter the way it was wired in line with the instructions and I changed the coil to a high performance type more capable of providing the higher voltages generated by the system. The only pointer I can give is to make sure all connections are good and that the magnet is pushed fully down. NP
|
|
|
Post by Harris on Apr 29, 2016 11:55:56 GMT
Thanks 2Rober4 Will be attempting to install it for the third time this weekend! Powerspark have been brilliant but still havent solved the no spark issue. Have got the Powerspark double silicon spark plug leads and a Viper Coil! Last things to try are removing most of the thermal paste as it needs a good connection as well as trying to spark the coil spark lead from the coil to earth and changing the timing...
|
|