5imon
New Member
Posts: 33
|
Post by 5imon on Jul 18, 2019 8:46:03 GMT
Good morning,
I've got the dreaded fan belt squeal and so it maybe time for a new one. Perusing the clubs parts catalogue give me two options. I've 1959 mk1, can anyone advise which part code I need?
Thanks,
Simon.
|
|
|
Post by canuck on Jul 20, 2019 12:55:21 GMT
Hello Simon, I am guessing you still have the original equipment with standard pulleys? water pump and dynamo? If so the correct size belt OE is quoted at 10mm x 925mm. I was unable to locate this size. With standard water pump and dynamo I fitted the Gates model 7370, in 11 x 940 size. Theoretically the incorrect size, but the 11mm fits the V of the pulleys just fine, (no squealing) and the 940mm length is easily installed and adjusts as should. Has been going strong with no issues since 2015, or >6000 kms. FWIW you may be able to read the part number on the back of the existing belt? salut Bruce
|
|
|
Post by canuck on Jul 31, 2019 13:03:29 GMT
Simon Did this work out for you? I suspect sizes vary on your side of the pond.
Bruce
|
|