|
Post by deltalimamike on Aug 19, 2019 13:14:31 GMT
Hi All, does anyone know the above on the MK3 1.5 at all please?
Thanks, Darren.
|
|
|
Post by canuck on Aug 22, 2019 14:17:42 GMT
Darren, I believe all model Riley used the same offset 3" wide road wheel. I measured this, probably not correctly, but this may help you. I do know that some owners that installed 165 tyres encountered interference with the tie rod end to the tyre sidewall. This is not so much a problem with the MM, that shares the spindle, as the tie rod is mounted lower on the spindle. Pay attention to this is the point. FWIW I bought 4.5" wide MM traveler wheels, (ESM) and encountered slight interference with the tie rod end, mounted 155 tyres, but can live with it using a 1/8" wheel spacer at the front wheels. Apologies I should have checked the offset. B
|
|
|
Post by deltalimamike on Aug 22, 2019 17:50:00 GMT
Darren, I believe all model Riley used the same offset 3" wide road wheel. I measured this, probably not correctly, but this may help you. View AttachmentI do know that some owners that installed 165 tyres encountered interference with the tie rod end to the tyre sidewall. This is not so much a problem with the MM, that shares the spindle, as the tie rod is mounted lower on the spindle. Pay attention to this is the point. View AttachmentFWIW I bought 4.5" wide MM traveler wheels, (ESM) and encountered slight interference with the tie rod end, mounted 155 tyres, but can live with it using a 1/8" wheel spacer at the front wheels. Apologies I should have checked the offset. B Thank you for this. I'm running 155 on a slightly wider wheel and things do look quite close which was why I asked the question. I'll have to do some more measuring I think before settling on wheels with a back up plan of a spacer if needed. Darren.
|
|