|
Post by 2robert4 on Jan 25, 2020 10:36:25 GMT
I have been looking for a Rear Bumper for some time and they are bent or rotten or both. However the Front Bumper is the same as the back but with a hole in it for the starting handle. You might consider looking for a front bumper and either repairing the hole and have it rechromed (Which is expensive) or as I have seen done in the recent past find a good one or NOS one and fit a Riley Radiator Badge over the hole this looks quite good as the curves are the same radia and the bumper fits correctly. Unfortunately I did not take a photo at the time Hope this is of some help?
NP
|
|
|
Post by rileyrob on Jan 26, 2020 19:43:50 GMT
Front and rear bumpers are not the same - the Riley front bumper has a more pronounced radius to follow the shape of the front panel whereas the rear one is straighter. They are both the same on the Wolseley 1500 but not on the Riley so a Wolseley front or rear bumper will be okay - apart from the hole for the starting handle of course.
|
|
|
Post by rileyrob on Jan 28, 2020 9:23:25 GMT
|
|
|
Post by falconriley on Feb 19, 2020 1:53:49 GMT
A straight rear bumper for what? A Riley, a RM, BMC? They are all different. Matthew
|
|