|
Post by canuck on Sept 5, 2023 15:52:00 GMT
Good point Jeff and this is exactly why I asked the question of their purpose. Many Girling™ master cylinder I encounter have a threaded end pushrod for the yoke. I imagine this is to adjust the length of the pushrod? and influence the pedal position/height? Curiously if one asks Mr. Google for Girling Master Cylinder spacer many pre made spacer of varying thickness are available. I may just go ahead and fashion a spacer for top and bottom fastener. Doesn't look to difficult, and I can do this while waiting for the seals kit to arrive. B
|
|