|
|
Post by mmenhenitt on Jan 18, 2019 15:46:11 GMT
Am I correct in assuming that it is impossible to fit front inertia reel seat belts to a Mk 1 without major bodywork surgery?
|
|
|
|
Post by 2robert4 on Jan 18, 2019 22:15:36 GMT
There is a company called Quick Fit Seat belts based just outside London that specialises in this sort of thing. I managed to find a set of 1960's universal seat belts on Ebay that allowed all the fittings to be made to the floor rather than to the B Post which is where most of the problems lie when fitting seat belts. I have pictures but I have never been able to add any to a post on this site to this day so if you send me a private email I can send the pictures directly to you and I may have found the phone number for Quick Fit too by then. Hope this information is of some help?
|
|
|
|
Post by mmenhenitt on Jan 19, 2019 13:21:51 GMT
Thank you for your help on this. It was in relation to a Mk 1 that has come up for sale on e bay, but after investigation I have decided not to pursue it and instead wait for a good Mk 3 to come up, which it surely will, eventually!
If you know of a good one please let me know,
Thank you again,
mike
|
|
