|
Post by mmenhenitt on Apr 6, 2019 16:08:14 GMT
Am I correct in assuming the steering column and wheel on a 1.5 is identical to a Morris Minor 1000 ?
|
|
|
Post by 2robert4 on Apr 6, 2019 16:43:03 GMT
Yes you are correct in part as the horn slip ring and insulator on the top of the column changed slightly to match the Minor and Mini Minor Circa 1962 onward but the bushes inner and outer column remained the same. Hope this helps NP
|
|
|
Post by mmenhenitt on Apr 6, 2019 17:27:02 GMT
Thank you. I want to fit my wood rim Moto Mita steering wheel into a Mk 2 1.5 and know where I can get a Minor1000 boss for one so just want to be able to use it
|
|
|
Post by 2robert4 on Apr 7, 2019 8:04:42 GMT
I had a similar problem because at the time I could only get hold of a secondhand early Mini or Morris Minor Moto Lita boss. I had the top machined to take the Riley Horn Push so that I could get the countersunk securing screw to line up with the securing fixture in the Horn Push other than that it is perfect. NP
|
|
|
Post by mmenhenitt on Apr 7, 2019 10:01:04 GMT
I am told that a Riley Elf steering column is the same as a 1.5 In case Motalita don’t have a 1.5 boss then an Elf one should fit without modification.
|
|