|
Post by deltalimamike on Dec 10, 2022 16:35:28 GMT
Hi All, I'm fairly sure this is a "yes" but would like confirmation before I commit.
Are the front wings the same fitment across all marks of the Riley one point five please?
Thanks in advance.
|
|
|
Post by rileyrob on Dec 10, 2022 17:09:00 GMT
Yes they are. Mk 1 & 2 cars will need a hole drilled to accept the mounting bolt of the wrap around front chrome side grilles but otherwise the fitment is exactly the same.
|
|
|
Post by deltalimamike on Dec 10, 2022 17:19:59 GMT
That's lovely thank you for confirming 👍
|
|
|
Post by davedale on Dec 11, 2022 12:51:27 GMT
Hi All, I'm fairly sure this is a "yes" but would like confirmation before I commit. Are the front wings the same fitment across all marks of the Riley one point five please? Thanks in advance. Hi, I am looking for a pair of steel front wings for my 1.5. It's a long shot, I know, but have you found a source that is supplying / manufacturing them? Thanks.
|
|
|
Post by deltalimamike on Dec 11, 2022 13:41:12 GMT
Hi All, I'm fairly sure this is a "yes" but would like confirmation before I commit. Are the front wings the same fitment across all marks of the Riley one point five please? Thanks in advance. Hi, I am looking for a pair of steel front wings for my 1.5. It's a long shot, I know, but have you found a source that is supplying / manufacturing them? Thanks. Hi, no, I haven't found a source, that said I used expressed panels for my new sills and they have wings listed (see the link). The sills were a very good fit. The wings aren't cheap though if they still do them. www.steelpanels.co.uk/products/bmc/wolseley-1500/engine-compartment-wolseley-1500/lh-front-wing-3/Darren.
|
|
|
Post by vue from the north on Dec 11, 2022 19:43:52 GMT
might be worth calling adrian bailey (think thats his name) he owns roverland.eu in leeds, he bought a lot of tin work from me when i was moving stuff on he specialises in bmc parts / steel
|
|
|
Post by davedale on Dec 14, 2022 15:05:41 GMT
might be worth calling adrian bailey (think thats his name) he owns roverland.eu in leeds, he bought a lot of tin work from me when i was moving stuff on he specialises in bmc parts / steel Thanks guys. Express Steel Panels only has a left hand wing ( at £835 - ouch ). Adrian Bailey hasn't got any wings but will let me know if any come up. I'll keep searching.
|
|
|
Post by vue from the north on Dec 15, 2022 18:22:40 GMT
i no i setting myself up for a shock /horror gasps but im running a fibre glass front panel, i sold the wings that went with it, in my view they are fine & the pre production rileys 1957 had complete fibre glass front end anyhow cos my front panel is one of them
|
|
|
Post by Mabel on Dec 28, 2022 6:44:34 GMT
Radfords can make steel panels but there’s a long lead in time. Minimum is 3 months, perhaps/probably more. radfordpanel.com/home
|
|
|
Post by Mabel on Dec 28, 2022 6:47:57 GMT
|
|
|
Post by vue from the north on Dec 29, 2022 22:32:57 GMT
there are a set of wings in blue fibre glass on ebay at the moment £125 or best offer in plymouth area, think the club would do a run on them if enough sales like they have done with the ss exhausts for the 1.5, get enough folk who want them then organise a production run
|
|