|
Post by cygnet61 on Mar 5, 2023 16:06:56 GMT
I’m struggling to find new anti-roll bar bushes for the Riley. Was an anti-roll bar original fitment or has it been retrofitted? Grateful if anyone has any information.
Regards Gordon
|
|
|
Post by vue from the north on Mar 5, 2023 17:21:49 GMT
there was an article about this is dec 22 magazine i recall, something like east sussex morris/ esm ltd, if you go to downloads the magazine is there to read, it will be a retro fit for either rallying or just to stiffen the front up stop it bouncing about, imo
|
|
|
Post by vue from the north on Mar 5, 2023 21:38:29 GMT
october 22 & dec 22 there are articles re the anti roll bars (the 1.5 page near the back) & its esm minor shop in sussex
|
|
|
Post by cygnet61 on Mar 6, 2023 20:22:54 GMT
there was an article about this is dec 22 magazine i recall, something like east sussex morris/ esm ltd, if you go to downloads the magazine is there to read, it will be a retro fit for either rallying or just to stiffen the front up stop it bouncing about, imo That’s great. Thank you very much for replying.
|
|
|
Post by canuck on Mar 12, 2023 19:42:40 GMT
Hello Gordon Actually I am the chap that posted about the wear of these bush and a possible remedy. I chose to flip the bush pairs over as the fixing screw compressed the plastic. I show the 'jist' of it below. B
|
|