|
Post by 2robert4 on Jul 28, 2023 16:35:25 GMT
Just require some information regarding Crankshaft endfloat is it 001 - 002 thou? and is the Main bearing and crank pin clearances .017 - .020 thou? I have mislaid my notes on this engine. Thanks in anticipation. NP
|
|
|
Post by jonnyb on Jul 28, 2023 20:16:04 GMT
Hi Robert tried to upload pics of workshop manual but forum seems to have exceeded its limit. My files were well below the 1MB limit! According to Riley 1.5 WSM AKD760E: Crank endfloat 2 to 3 thou .002 to .003 inch Mains running clearance 1/2 to 2 thou .0005 to .002 inch Big end clearance 1 to 2 1/2 thou .001 .0025 Also MGA WSM gives same figures.
|
|
|
Post by 2robert4 on Jul 29, 2023 8:28:30 GMT
Thanks for the the prompt reply and information.NP
|
|