|
Post by canuck on Sept 14, 2016 17:56:07 GMT
Hello chaps, I have had a small 'issue' with my wrenching craftsmanship. The lower stay bar fix #34 let go and the threads of the fix are bugg*rd. I also lost the 'special' nut #36 somewhere on the road.
So, has anyone got a spare for purchase, #34, #35, #37 & #36? I looked at the MM spares providers and these bits are not called up on their web sites. I have cleaned up the threads of #34, found a suitable locknut #36 and put everything back together for now. However I do need the correct replacement parts to do it right.
Thanks in advance
Bruce
|
|
|
Post by Mabel on Sept 23, 2016 6:27:35 GMT
Bruce, even though they are not listed in the spares list, Club Spares sometimes has some odds and sods in a box so it might be worth asking them. Also, call/email Earlpart as they too sometimes have spares for sale that are not detailed.
|
|
|
Post by canuck on Sept 23, 2016 19:28:52 GMT
Graham, Good suggestions, thanks. I may have a lead on some OE Morr*s Manure bits, (this side of the pond) that should fit. Cold season is rapidly approaching, only a few more opportunities to get out & about with George, so I have some time to find the bits and do the mend over the winter.
I will let us know how I end up this self induced mechanical 'indiscretion'.
B
|
|
|
Post by rileynz on Sept 25, 2016 20:27:14 GMT
Hi Bruce, i will be completly wrecking one of my 1.5s, sometime in the next few months. Your welcome to the bits you need. Will have to post from the colonies, so may not be cheap. Cheers Nick
|
|
|
Post by canuck on Sept 27, 2016 21:39:12 GMT
Hi Bruce, i will be completly wrecking one of my 1.5s, sometime in the next few months. Your welcome to the bits you need. Will have to post from the colonies, so may not be cheap. Cheers Nick Nick, I have located some close to me but I appreciate your offer.
B
|
|