|
|
Post by casper171072 on Apr 19, 2018 20:47:27 GMT
Does anyone know the size of the screws/bolts that hold the chrome trim with the side loses and indicators to the body. I know the diameter of the bolts are 4.7mm and I guess they are under thread. I want to replace some of them but don’t know what to look for
|
|
tjt77
Junior Member
Posts: 68
|
Post by tjt77 on Jun 19, 2018 0:30:15 GMT
Should be 10/32...(No10, 32 tpI) and a 5/16" spanner or socket fits the heads.. in the absence of 5/16' an 8mm will fit but its a tad tighter. MIGHT have originally been 2 BA .. a size often use on the brightwork of the MGA..(I'm not 100% sure) the 2 sizes are VERY close.. I always re-tap them and use 10/32 hardware ( as that is what i have in stainless steel in my nut and bolt bins)
|
|
