|
Post by canuck on May 24, 2018 22:38:52 GMT
Chaps, I noticed a machined section at the inner casting on my front wheel hubs. As one can se the lip that holds the oil seal is not particularly thick.
Is this the norm? Does anyone know why? I suspect to clear the brake back plate & fasteners?
Thanks in advance
Bruce
|
|
tjt77
Junior Member
Posts: 68
|
Post by tjt77 on Jun 18, 2018 23:25:06 GMT
its normal.. its machined off to clear the back plates.. these hubs were sued on numerous cars :-nash metropolitan, sprite Mk1, riley 1.5, morris minor, wolseley 1500 .. in Aus austin lancer and morris major..
|
|